Description
Silicon seal of the middle module for secondary sealing of non-structural glazing units. The neutral is rejected; the release rate is adjusted; it is suitable for mechanical and manual application under production conditions.
Resistance to ageing, water and temperature.
The compatibility with the primary seam butyl seal is declared by the manufacturer.
Deleting without corrosive effect on the materials to be connected.
Technical specifications
| Component A / component B | White paste/black paste |
|---|---|
| Leaking, vertical | ≤3 mm |
| Open time | ≥20 min |
| Time to no stickiness | ≤120 min |
| Strength of connection | ≥0,6 MPa |
| Mass loss during heating | ≤3% |
| Hardness, Shore A | ≥35 |
| Manufacturer ' s declaration standard | GB/T 29755-2013 |
Packaging A/B: 190 л / 19 l or 19 л / 2150 Storage in cool, air-cooled space below +27 °C; Storage time — 9 The mix on the manufacturer's page is not specified.03; The compatibility of a particular mark requires that the passport be checked.