Description
The machine is designed to cut laminated glass. The weld frame is made of a line tube and a design piece. The responsible areas are heated and ported to increase hardness and stability. The design consists of two sections.
The first section provides operator loading, transport and automatic positioning. The second consists of upper and lower cutting systems, interlayer film cutting, heating and auxiliary unloading.
Technical specifications
| Power supply | 380 B 50Hz |
|---|---|
| Total power | 15kW |
| Air pressure | Min.0.8MPa |
| Office table height | 900±50mm |
| Cutting length | Max.3700mm Min250mm |
| Glass thickness | 3+3 ~ 8+8mm |
| Interlayer film thickness | 0.38~ 1.52mm |
| Cut Speed | 100 m/min |
| Positioning Accuracy | ±0.25mm |
| Accuracy of direct cut | ±0.30mm |
| Accuracy of parallel | 0.20mm |
| Diagonal accuracy | 0.5mm |
| Dimensions | 4720×3500×1450mm |
| Positioning of glass | Mechanical |
| Positioning of glass | Photoelectric |