CNC machining centres
CLXF-CNC-4000
High-speed CNC machining centre for aluminium
Description
Browsing of round, belly, lock and fabulous openings in aluminium and PVC; fresco, phase removal, aluminum engraving and marking.
Automatic change of tools, store for 6 tools, instrument status sensor, ability to operate with a disk saw.
Switch to software and start barcode processing.
A library of standard figures, software imports.
Shenyi Spindel 5,5 kW or OLI 9 kW.
Special removal of the prune and lower pan maintain purity.
The protective housing automatically rises and drops.
Truck, lead and screw gears.
Possible installation of an active compression system.
Intuitive lighting of the hull.
The control system for SYNTEC or the Hanäs CNC is selected.
Technical specifications
| Power supply | 380 B/50 Hz |
|---|---|
| Total power | 7,2 kW |
| Spindle power | 5,5 kW |
| Spindle speed | 18000 rpm |
| Working air pressure | 0,5–0,8 MPa |
| X-axis travel | 4000 мм |
| Y-axis travel | 400 mm |
| Z-axis travel | 300 mm |
| Speed on X axis | 0 - 97 m/min |
| Speed on Y axis | 0 - 30 m/min |
| Speed on Z axis | 0 - 30 m/min |
| Positions in the tool shop | 6 |
| Processing area | 160×160×4000 мм |
| Type of zanga | ER32 |
| Accuracy of processing | ±0,1 mm |
| Cherokee surface roughness | Ra12,5 µm |
| Dimensions | 5300×2200×2000 мм |
| Weight | около 2150 кг |
Возможна интеграция с ORGADATA / LogiKal при оснащении системой управления Han’s CNC.