End milling
CLDX7A-CNC-350
7-axis CNC end milling machine
Description
Spraying and milling of the thorn and ramped surfaces of aluminium windows and door profiles.
7-axle CNC system: simple programming, high compatibility and automated processing.
Maintaining several groups of programs and processing the selected profile: less errors and higher speeds.
Continuous fructuring of the ends and ramped surfaces of aluminium-plastic profiles of different sections.
Processing without individual fresus setting. According to the source, the output is twice as high as traditional truck-freighting with CNCs.
Precyon double-headed electropindles: Discs of different thickness at both ends; one spindle automatically rotates 90 degrees.
Centralized collection of prunes, filtering of spent air and blowing against spray.
* In the source: 2 spindles of 3 kW in the description, 3×3 kW in the table. The composition of the drive must be specified.
Technical specifications
| Power supply | 380 B / 50 Hz |
|---|---|
| Total power | 11,25 kW |
| Spindle power | 3×3,0 kW* |
| Motor speed | 2800 rpm |
| Air pressure | 0,5–0,8 MPa |
| Air consumption | 40 l/min |
| Diameter of fresus | Ø350×Ø32 mm |
| Number of frescoes | 6 |
| Work desk | 480×320 mm |
| Thickness of presentation | 75 mm |
| Cutting angle | 0°, 90° |
| Repositioning | ≤±0,02 mm |
| Inflexibility of cut | Ra 12,5 µm |
| Surface density | ≤±0,05 mm |
| Dimensions | 4100×1700×2000 mm |
| Weight | about 1200 kg |