Cutting and machining lines
CGS-6500
Integrated intelligent cutting and machining centre
Automation of programme unloadingRemote access
Request a quote ↗Description
The door and window production line combines drilling, paste fructuring, cutting, corner protection, laser marking, puncture and label seal.
Processing of frame profiles, bars and impostes per passage without over-packing or sorting.
Cut from -45° to 45°.
Openings under the handle and corner connector, puzzles under the lock body.
Mount and drain holes, puzzle under the transmission rod.
Positioning of the impost with laser line, corner tread trim.
Technical specifications
| Power supply | 380 B / 50 Hz |
|---|---|
| Total power | 18,5 - 30 kW, depending on configuration |
| Working air pressure | 0,5–0,8 MPa |
| saw disc | Ø550×Ø30×4,4; Z=120 |
| Style width | 120 mm |
| Section processing height | 155 mm |
| Supply length | 700–6500 mm |
| Length of output | 250–3500 mm |
| Cutting angle | -45°, 45°, 90°; arbitrary angle |
| Dimensions | 15000×3000×2600 mm |
| Positioning Accuracy | ±0,1 mm |
| Repositioning | ±0,05 mm |
| Flatness of the cut surface | ≤0,10 mm |
| Accuracy of the cut angle | ±5′ |
| Source note | The parameters need to be specified. |