Glass packaging equipment
JYHLCH-2030
Automatic insulating glass line with beam transfer and gas filling
Models: JYHLCH 2025 · JYHLCH 2030 · JYHLCH-2535
Description
The beaming system for the rise and movement of glass with an accurate servo prevents traces from rear rollers.
The PLC and the operator's sensor interface.
Coated glass and Low-E recognition.
Four-axle press management: assembly, pressure and law enforcement.
Glass measurement and optimization of the gas filling area to save gas.
Argon content in glass pack ≥ 85%.
Three pairs of wash brushes; controlled drive is an option.
Stainless steel and corrosion resistant washing: water resistance and durability.
Leveld and two-chamber glass packs are an option.
Powder-coated protective panels.
Electrical components of known international stamps.
Central positioning in external assembly.
The opening press section facilitates the service.
Figureglass: 200x450 mm, semi-automatic mode (by source).
Technical specifications
| Power supply | 380 B 50Hz |
|---|---|
| Total power | 41.5kW |
| Air pressure | 0.5~0.8MPa |
| Maximum glass size | 2000×3000mm |
| Minimum glass size | 280×450mm |
| Direction | To the right of the left |
| Glass thickness | 3~18mm |
| Speed of movement | 8~45m/min |
| Dimensions | 24000×2000×3200mm |
| Weight | About 9000kg |
Models and specifications
| Parameter | JYHLCH-2025 | JYHLCH-2030 | JYHLCH-2535 |
|---|---|---|---|
| Power supply | 380 B 50Hz | 380 B 50Hz | 380 B 50Hz |
| Total power | 40.0kW | 41.5kW | 45.0kW |
| Air pressure | 0.5~0.8MPa | 0.5~0.8MPa | 0.5~0.8MPa |
| Maximum glass size | 2000×2500mm | 2000×3000mm | 2500×3500mm |
| Minimum glass size | 280×450mm | 280×450mm | 280×450mm |
| Direction | To the right of the left | To the right of the left | To the right of the left |
| Glass thickness | 3~18mm | 3~18mm | 3~18mm |
| Speed of movement | 8~45m/min | 8~45m/min | 8~45m/min |
| Dimensions | 21000×2000×3200mm | 24000×2000×3200mm | 26500×2000×3700mm |
| Weight | About 8000kg | About 9000kg | About 11000kg |